Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Locking screw for slide device |
(2) | Slide device |
(3) | Laser warning label |
(4) | Transport handle |
(5) | Handle |
(6) | Lock-off function for On/Off switch |
(7) | Protective guard |
(8) | Retracting blade guard |
(9) | Mounting holes |
(10) | Insert plate |
(11) | Lock button for mitre angle |
(12) | Locking knob for all mitre angles |
(13) | Lock button for bevel angle |
(14) | Angle indicator for mitre angles |
(15) | Detents for standard mitre angles |
(16) | Saw table extension |
(17) | Workpiece supportA) |
(18) | Fixed fence |
(19) | Adjustable fence |
(20) | Screw clamp |
(21) | Adjustment knob for 0° bevel angle |
(22) | Depth stop |
(23) | Depth stop adjusting screw |
(24) | Hex key |
(25) | Transport Safety Lock |
(26) | Length stop |
(27) | Recessed handles |
(28) | Mounting holes for horizontal fixing |
(29) | Saw table |
(30) | Scale for mitre angles |
(31) | Tilt protector |
(32) | Guide roller |
(33) | Spindle lock |
(34) | Laser beam outlet aperture |
(35) | On/off switch |
(36) | On/Off switch for laser (cutting line indication) |
(37) | Chip ejector |
(38) | Wing bolt for fixing the adjustable fence |
(39) | Holes for screw clamp |
(40) | Stop screw for right-hand bevel angle range |
(41) | Standard bevel angle stops 45°, 22.5° and 33.9° |
(42) | Clamping screw for saw table extension |
(43) | Securing screw for saw table extension |
(44) | Opening for workpiece support (on power tool) |
(45) | Opening for second workpiece support (on workpiece support) |
(46) | Dust bag |
(47) | Hex socket screw for mounting the saw blade |
(48) | Clamping flange |
(49) | Saw blade |
(50) | Inner clamping flange |
(51) | Wing bolt for adjusting the height of the threaded rod |
(52) | Threaded rod |
(53) | Wing bolt for screw clamp |
(54) | Screw clamp pins |
(55) | Angle indicator for bevel angles |
(56) | Scale for bevel angles |
(57) | Clamping screw for length stop |
(58) | Guide rail for length gauge |
(59) | Wing bolt for fixing the guide rail for length gauge |
(60) | Screws for insert plate |
(61) | Set screw for positioning the laser |
(62) | Set square |
(63) | Stop screw for 0° bevel angle |
(64) | Hex socket screw for fence |
(65) | Screw for bevel angle indicator |
(66) | Screw for mitre angle indicator |
- A)
Not available in all country-specific versions.