Adjusting bevel angles

The bevel angle can be set between 45° (left-hand side) and 0° (right-hand side).

For quick and precise setting of frequently used bevel angles, fixed positions have been provided for the angles 0° and 45°.

Setting Any Bevel Angle (see figure J)

Pull the adjustable fence (23) all the way out.
Loosen the clamping handle (33).
Use the handle (4) to swivel the tool arm until the angle indicator (25) shows the required bevel angle.
Hold the tool arm in this position and retighten the clamping handle (33).